Dell C3765dnf Dell Multifunction Color Laser Printer Users Guide - Page 269
Reset Defaults, Initialize Print Meter, Reset Fusing Unit, Reset Transfer Belt Unit, Clear Storage
View all Dell C3765dnf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Color Regi Chart Print Enter Number LY LM LC RY RM RC PY PM PC Available Range: -9 to +9 Available Range: -9 to +9 Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the values on the right side that are next to the line that is perfectly straight for each of the three colors. If the value for this line is 0, color registration adjustment is not required. If the value for this line is any value other than 0, specify the adjustment values under under lateral adjustment and process adjustment in Enter Number. Sets lateral (perpendicular to paper feed direction) and process (paper feed direction) color adjustment values individually for Yellow, Magenta, and Cyan. Enter a number in order of lateral adjustment (left), lateral adjustment (right), and process adjustment. Select OK to save all the settings. Available Range: -9 to +9 NOTE: Ensure that you remove the paper from the single sheet feeder before performing Auto Correct. Reset Defaults Purpose: To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu parameters are reset to their default values. Values: User Fax Section User Scan Section System Section Initialize Initializes the fax number entries in the Address Book. Initialize Initializes the e-mail and server address entries in the Address Book. Initialize Initializes the system parameters. Initialize Print Meter Purpose: To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero. Reset Fusing Unit Purpose: To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter. Reset Transfer Belt Unit Purpose: To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life counter. Clear Storage NOTE: Clear Storage feature is available only when RAM Disk is set to On or when the optional hard disk is installed. Understanding the Printer Menus 267