Dell DR4000 Owner's Manual - Page 113
Power Distribution Board, Removing the Power Distribution Board - drivers
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Power Distribution Board The power distribution board is located on your system directly behind the power supply fan module. See Figure 3-25. Removing the Power Distribution Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Remove the internal hard drive bay and support carrier. See "Removing an Internal Hard Drive Bay" on page 67. 2 If applicable, remove the thumb screw on the support bracket and lift it up and out of the system. 3 Remove the power supplies from the system. See "Removing a Power Supply" on page 74. 4 Remove the expansion cards. See "Removing an Expansion Card" on page 82. 5 Remove the expansion card riser. See "Removing an Expansion-Card Riser" on page 83. 6 Disconnect power distribution cables from the system board (see "System Board" on page 116). 7 Disconnect the fan cable. 8 Remove the three screws securing the power distribution board to the chassis using the #2 Phillips screw driver. See Figure 3-25. 9 Pull the blue tab, lift the power distribution board, and move it toward the front of the system to disengage from the tabs on the power supply bay. See Figure 3-25. Installing System Components 113