Dell DR4000 Owner's Manual - Page 87
Removing the Storage Controller Card, Disconnect the SAS cables connected to the card.
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removing the Storage Controller Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 60. 3 If installed, remove the expansion card. See "Removing an Expansion Card" on page 82. 4 Disconnect the SAS cables connected to the card. 5 Disconnect the cable connecting the card to the expansion-card riser. 6 For a battery-cached RAID controller, disconnect the cable connecting the card to the RAID battery. 7 Bend both the card-edge guides outward and pull the storage controller card out of the connector. Installing System Components 87