Dell DR4000 Owner's Manual - Page 35
Unsupported, memory, configuration., DIMM mismatch, across slots, detected, Optimized, Sparing - firmware update
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Message Causes Corrective Actions Unsupported memory configuration. DIMM mismatch across slots detected: x,x,... Invalid memory configuration. Memory modules are mismatched in the specified slots. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 76. Unused memory The memory configuration detected. DIMM's is not optimal for installed in the mirroring mode. following slot Modules in the are not available specified slots are unused. when in mirror mode: x,x,x. Reconfigure the memory for memory mirroring mode, or change the memory mode to Optimized or Sparing in the BIOS setup screen. See "System Memory" on page 76. Unused memory The memory configuration is Reconfigure the memory for detected. DIMM's not optimal for Advanced Advanced ECC Memory installed in the ECC Memory Mode. Mode, or change the following slot Modules in the specified memory mode to Optimized are not available slots are unused. or Sparing in the BIOS setup when in 128-bit screen. See "System advanced ECC Memory" on page 76. mode: x,x,x. Warning: A fatal A fatal system error error has caused occurred and caused the system reset! system to reboot. Please check the system event log! Check the SEL for information that was logged during the error. See the applicable troubleshooting section in "Troubleshooting Your System" on page 121 for any faulty components specified in the SEL. Warning! No micro Micro code update failed. code update loaded for processor n. Update the BIOS firmware. See "Getting Help" on page 149. About Your System 35