Dell DR4000 Owner's Manual - Page 20
Table 1-3., Diagnostic Indicator Codes, Causes, Corrective Action, See Getting Help
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-3. Diagnostic Indicator Codes Code Causes Corrective Action The system is in a normal Plug the system into a working off condition or a possible electrical outlet and press the pre-BIOS failure has power button. occurred. Information only. The diagnostic lights are not lit after the system successfully boots to the operating system. The system is in a normal operating condition after POST. BIOS checksum failure detected; system is in recovery mode. See "Getting Help" on page 149. Possible processor failure. See "Troubleshooting Processors" on page 136. Memory failure. See "Troubleshooting System Memory" on page 129. Possible expansion card See "Troubleshooting Expansion failure. Cards" on page 134. Possible video failure. See "Getting Help" on page 149. Hard drive failure. Possible USB failure. Ensure that the hard drives are properly connected. See "Hard Drives" on page 63 for information on the drives installed in your system. See "Troubleshooting a USB Device" on page 122. 20 About Your System