Dell DR4000 Owner's Manual - Page 29
MEMTEST lane, failure, detected on, See Using the System Setup
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Message Causes Corrective Actions Memory tests terminated by keystroke. POST memory test was terminated by pressing the spacebar. Information only. MEMTEST lane failure detected on x. Invalid memory configuration. Mismatched memory modules are installed. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 76. Mirror mode The memory configuration Reconfigure the memory disabled. For does not match the setting in modules for Memory mirror mode, BIOS. The BIOS setting has Mirroring mode. See DIMMs must be been disabled. "System Memory" on installed in page 76. pairs. Pairs must be matched in size and geometry. No boot device available. Faulty or missing hard drive, or hard drive subsystem, or no bootable USB key installed. Use a bootable USB key or hard drive. If the problem persists, see "Troubleshooting a USB Device" on page 122 and "Troubleshooting a Hard Drive" on page 131. See "Using the System Setup Program and UEFI Boot Manager" on page 39 for information on setting the order of boot devices. About Your System 29