Dell DR4000 Owner's Manual - Page 18
Power Indicator Codes
View all Dell DR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 1-1. LED States during Normal Powered Operation of NVRAM Card Green Indicator Steady Off Blinking Amber Indicator Off Steady Off/Steady/Blinking Description Card is activated and operational. Error due to one or more of the following: • Supercapacitors are not connected. • Flash module is either not connected or is not responding. • POST memory test has failed. Data activity from host. Table 1-2. LED States during Power Loss Green Indicator Blinking Blinking Blinking Steady Steady Amber Indicator Off Blinking Steady Blinking Steady Backup Progress 0 to 25% 25 to 50% 50 to 75% 75 to 100% Backup complete. Power Indicator Codes The power supplies have an indicator that shows whether power is present or a power fault has occurred. • Not lit - AC power is not connected. • Green - In standby mode, indicates that a valid AC source is connected to the power supply, and that the power supply is operational. When the system is on, it also indicates that the power supply is providing DC power to the system. • Amber - Indicates a problem with the power supply. 18 About Your System