Dell Dimension 4600 Owner's Manual - Page 42
Software and Hardware - remove hard drive
View all Dell Dimension 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
www.dell.com | support.dell.com Light Pattern A B C D A B C D A B C D = yellow = green = off Problem Description Memory modules are detected, but a memory configuration or compatibility error exists. A possible expansion card failure has occurred. Other failure has occurred. Suggested Resolution • Ensure that there are no special memory module/memory connector placement requirements (see page 75). • Verify that the memory modules that you are installing are compatible with your computer (see page 75). • If the problem persists, contact Dell (see page 90). 1 Determine if a conflict exists by removing a card and then restarting the computer. 2 If the problem persists, reinstall the cards that you removed, remove a different card, and then restart the computer. 3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" on page 49). 4 If the problem persists, contact Dell (see page 90). • Ensure that the cables are properly connected from the hard drive, CD drive, and DVD drive to the system board (see page 70). • If the problem persists, contact Dell (see page 90). 42 Advanced Troubleshooting