Dell Dimension 4600 Owner's Manual - Page 54
Adding Parts, network jack, modem jack - front panel wiring
View all Dell Dimension 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
www.dell.com | support.dell.com 7 network adapter connector To attach your computer to a network or modem, connect one end of a network cable to either a network jack or your network device. Connect the other end of the network cable to the network adapter connector on the back panel of your computer. A click indicates that the network cable has been securely attached. On computers with a network connector card, use the connector on the card. It is recommended that you use Category 5 wiring and connectors for your network. If you must use Category 3 wiring, force the network speed to 10 Mbps to ensure reliable operation. network jack modem jack 8 video connector 9 optional sound card connector 10 card slots (3) 11 USB 2.0 connectors (6) 12 microphone connector 13 line-out connector 14 center/LFE connector 15 keyboard connector Plug the cable from your monitor into the blue connector. (On computers with a video card.) If you purchased the optional sound card, plug your sound equipment (speakers, microphone, and so on) into the appropriate sound card connectors. Access connectors for any installed PCI cards. Use the back USB connectors for devices that typically remain connected, such as printers and keyboards. It is recommended that you use the front USB connectors for devices that you connect occasionally, such as joysticks or cameras. Use the pink microphone connector (available on computers with integrated sound) to attach a personal computer microphone for voice or musical input into a sound or telephony program. (On computers with a sound card, the microphone connector is on the card.) Use the green line-out connector (available on computers with integrated sound) to attach headphones and most speakers with integrated amplifiers. (On computers with a sound card, use the connector on the card.) Use the yellow center/Low-Frequency Effects (LFE) connector (available on computers with integrated sound) to attach your subwoofer. (On computers with a sound card, use the connector on the card.) If you have a standard keyboard, plug it into the purple keyboard connector. If you have a USB keyboard, plug it into a USB connector. 54 Adding Parts