Dell EqualLogic PS6610E EqualLogic PS6610 Storage Arrays Hardware Owners Manua - Page 29
Install, Control, Module
View all Dell EqualLogic PS6610E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
PS6610 Hardware Owner's Manual 3 Control Module Maintenance Figure 14: Removing a Control Module 3. Place the control module on a flat surface where it will be protected from electrostatic discharge. To avoid damage, do not place anything on top of the control module. 4. If you are replacing a failed control module, remove the microSD card from the failed control module and install it in the replacement control module. Using the card from the failed control module ensures that the new control module is running the correct firmware and a correct array configuration. See Replace the MicroSD Card on page 25. Return the failed control module in the packaging in which the replacement module was shipped. Contact your PS Series support provider for information about returning hardware. Install a Control Module You can install a control module without shutting down the array. Caution: Replace control modules with the same type only. Do not mix control module types in an array. Control modules are installed horizontally in the array, with the Ethernet ports on the right and the serial port on the left. 23