Dell EqualLogic PS6610E EqualLogic PS6610 Storage Arrays Hardware Owners Manua - Page 36
Insert, Battery, Return, Dispose
View all Dell EqualLogic PS6610E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
PS6610 Hardware Owner's Manual 3 Control Module Maintenance Insert the New Battery 1. Attach the new battery unit to the connector, and gently wiggle and push the connector in place to seat it. You do not need to depress the retention clip to insert the connector. When the connector is fully seated, you should hear the retention clip click into place. 2. Place the new battery unit in the chassis by reversing the procedure from step 5 for removing the battery. Note: You might need to slightly reposition the cable inside the control module to get it out of the way and ensure easy reassembly. Make sure that the cable is not pinched between the battery cover and the control module chassis. 3. Reinsert the screw and tighten gently. 4. Reinsert the control module and reconnect the cables. Return or Dispose of the Old Battery The manner in which to dispose of rechargeable batteries varies by country. Make sure that you dispose of your old battery in a way that conforms to your country's regulations. Alternatively, you can return the old battery back to Dell for proper disposal. See Shipping Requirements on page 28. 30