Dell EqualLogic PS6610E EqualLogic PS6610 Storage Arrays Hardware Owners Manua - Page 32

Insert, MicroSD

Get Dell EqualLogic PS6610E PDF manuals and user guides View all Dell EqualLogic PS6610E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

PS6610 Hardware Owner's Manual 3 Control Module Maintenance Caution: To reduce the risk of losing or damaging the microSD card, do not remove it until you are ready to install it in the replacement control module. 1. Firmly push the card into its housing to release the spring mechanism (see Figure 17). The microSD card will become partially ejected from the housing. 2. Gently pull the card straight out of the housing. 3. Place the microSD card on a flat surface where it will be protected from electrostatic discharge. Figure 17: Ejecting the MicroSD Card Insert the MicroSD Card 1. Align the replacement microSD card so the arrow on the card points toward the housing (Figure 18). When correctly positioned, the gold contacts will be facing downward, and inward toward the housing. 2. Firmly press the card into the housing until it clicks into place. Confirm that the card is securely seated by pressing to ensure the release spring mechanism is engaged and ejects the SD card. Then, reinsert the SD card and ensure it is seated securely by pulling gently on the SD card. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
PS6610
Hardware
Owner's
Manual
3
Control
Module
Maintenance
Caution:
To
reduce
the
risk
of
losing
or
damaging
the
microSD
card,
do
not
remove
it
until
you
are
ready
to
install
it
in
the
replacement
control
module.
1.
Firmly
push
the
card
into
its
housing
to
release
the
spring
mechanism
(see
Figure
17
).
The
microSD
card
will
become
partially
ejected
from
the
housing.
2.
Gently
pull
the
card
straight
out
of
the
housing.
3.
Place
the
microSD
card
on
a
flat
surface
where
it
will
be
protected
from
electrostatic
discharge.
Figure
17:
Ejecting
the
MicroSD
Card
Insert
the
MicroSD
Card
1.
Align
the
replacement
microSD
card
so
the
arrow
on
the
card
points
toward
the
housing
(
Figure
18
).
When
correctly
positioned,
the
gold
contacts
will
be
facing
downward,
and
inward
toward
the
housing.
2.
Firmly
press
the
card
into
the
housing
until
it
clicks
into
place.
Confirm
that
the
card
is
securely
seated
by
pressing
to
ensure
the
release
spring
mechanism
is
engaged
and
ejects
the
SD
card.
Then,
reinsert
the
SD
card
and
ensure
it
is
seated
securely
by
pulling
gently
on
the
SD
card.
26