Dell FC4 Brocade 5000 Hardware Reference - Page 15

Chapter Installing and Configuring the Brocade 5000 2 This chapter provides the following information: - "Items Included with the Brocade 5000," next - "Installation and Safety Considerations" on page 5 - "Setting Up the Switch Using Mounting Ears" on page 6 - "Setting Up the Brocade 5000 as a Standalone Unit" on page 7 - "Configuring the Brocade 5000" on page 7 - "Recommendations for Cable Management" on page 13 Items Included with the Brocade 5000 The following items are included with the standard shipment of the Brocade 5000: - The Brocade 5000 switch, containing two power supply/fan assembly units - One accessory kit, containing the following items: - The Brocade 5000 QuickStart Guide - The Brocade Documentation CD-ROM - 32 SFP (small-form-factor pluggable) transceivers (optional) - Mounting ears and screws - Rubber mounting feet (to be used when setting up the Brocade 5000 as a standalone unit) - Two grounded 6-ft. (approximately 1.83 meters) power cords - The power plug type is NEMA5-15 - Power plug current/voltage rating: 1.4A/125V - Cordage type: SVT - Current rating/wire gauge: 10A/ 18AWG - Connector at system end of cordset: IEC 60320/ C13 - One serial cable, 10-ft. (approximately 3 meters) long - EZSwitch Setup CD - EZSwitch Setup ReadMe First document - Fabric Manager Evaluation CD Installation and Safety Considerations You can install the Brocade 5000 in the following four ways: Brocade 5000 Hardware Reference Manual 5 Publication Number: 53-1000424-03