Dell FC4 Brocade 5000 Hardware Reference - Page 34

4 Weight and Physical Dimensions Weight and Physical Dimensions Table 3 lists the weight and dimensions of the Brocade 5000. TABLE 3 Physical Specifications Dimension Height Depth Width Weight (with two power supplies/fan assemblies installed, no SFPs) Value 1U = 43.5 mm (1.71 inches) 264 mm (10.39 inches) 428.75 mm (16.88 inches) 10.8 lbs (4.9 kg) Facility Requirements To ensure correct operation of the switch, the facility where the switch is in use must meet the following requirements: - Electrical: - Primary AC input 100-240 VAC (switch autosenses input voltage), 47-63 Hz. - Correctly wired primary outlet, protected by a circuit breaker and grounded in accordance with local electrical codes. - Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate. - Electrical interference must be less than the levels stated in the standards listed in Table 6 on page 4-26, under "Immunity." - Thermal: - Air flows from the non-port side to the port side. A minimum air flow of 47 cubic feet/minute (79.8 cubic meters/hour) available in the immediate vicinity of the switch. - Ambient air temperature must not exceed 40° Celsius (104° Fahrenheit) while the switch is operating. - Environmental: The specifications listed in Table 5 on page 4-26 - Cabinet: - Cabinet space of one rack unit in a 19-inch cabinet. - All equipment in cabinet must be grounded through a reliable branch circuit connection. - The additional weight of the switch must not exceed the cabinet's weight limits. - The cabinet must be secured to ensure stability in case of unexpected movement. 24 Brocade 5000 Hardware Reference Manual Publication Number: 53-1000424-03