Dell Inspiron 17 7778 2-in-1 Inspiron 177000 Series 2-in-1 Service Manual - Page 113
Replacing the sensor board, Procedure, Post-requisites
View all Dell Inspiron 17 7778 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Replacing the sensor board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the sensor board on the display-panel assembly and snap the sensor board in place. 2 Slide the sensor-board cable into the connector on sensor board and press down the latch to secure the cable. 3 Adhere the tape that secures the sensor-board cable to the sensor board. 4 Replace the screw that secures the sensor board to the display-panel assembly. Post-requisites 1 Follow the procedure from step 6 to step 8 in "Replacing the display panel". 2 Replace the display assembly. 3 Replace the wireless card. 4 Replace the battery. 5 Replace the base cover. 113