Dell Inspiron 17 7778 2-in-1 Inspiron 177000 Series 2-in-1 Service Manual - Page 78
Removing the display assembly, Prerequisites, Procedure
View all Dell Inspiron 17 7778 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the wireless card. Procedure 1 Peel off the tape that secures the antenna cables to the palm-rest assembly. 2 Peel off the tapes that secure the display cable and touch-screen board cable to the system board. 3 Open the latches and disconnect the display cable and the touch-screen board cable from the system board. 78