Dell Inspiron 5400 AIO Inspiron 24-5400 Service Manual - Page 23

Coin-cell battery, Removing the coin-cell battery

Get Dell Inspiron 5400 AIO PDF manuals and user guides View all Dell Inspiron 5400 AIO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. NOTE: Repeat step 1 and 2 if there are two memory modules. Next steps 1. Install the system-board shield. 2. Install the stand. 3. Install the bottom cover. 4. Install the back cover. 5. Follow the procedure in After working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the back cover. 3. Remove the bottom cover. 4. Remove the stand. 5. Remove the system-board shield. About this task The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure. Removing and installing components 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Steps
1.
Align the notch on the memory module with the tab on the memory-module slot.
2.
Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 and 2 if there are two memory modules.
Next steps
1.
Install the
system-board shield
.
2.
Install the
stand
.
3.
Install the
bottom cover
.
4.
Install the
back cover
.
5.
Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
back cover
.
3.
Remove the
bottom cover
.
4.
Remove the
stand
.
5.
Remove the
system-board shield
.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
Removing and installing components
23