Dell Inspiron 5400 AIO Inspiron 24-5400 Service Manual - Page 40
Antennas, Removing the antennas
View all Dell Inspiron 5400 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Align the screw holes on the fan with the screw holes on the display-assembly base. 2. Replace the three screws (M2x2.5) that secure the fan to the display-assembly base. 3. Route the fan cable through the routing guides on the display-assembly base. 4. Connect the fan cable to the system board. Next steps 1. Install the system-board shield. 2. Install the stand. 3. Install the bottom cover. 4. Install the back cover. 5. Follow the procedure in After working inside your computer. Antennas Removing the antennas Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the back cover. 3. Remove the bottom cover. 4. Remove the stand. 5. Remove the system-board shield. 6. Remove the wireless card. 7. Remove the speakers. About this task The following image indicates the location of the antennas and provides a visual representation of the removal procedure. 40 Removing and installing components