Dell Inspiron 5400 AIO Inspiron 24-5400 Service Manual - Page 42
Camera, Removing the camera
View all Dell Inspiron 5400 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
NOTE: Note the location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W (white). Steps 1. Align the antenna modules (2) with the slots on the base panel and adhere it in place. 2. Adhere the copper foil that secures the antenna cables (2) to the base panel. 3. Replace the two screws (M2x2.5) that secure the antenna modules (2) to the base panel. 4. Route the antenna cables through the routing guides on the display-assembly base. Next steps 1. Install the speakers. 2. Install the wireless card. 3. Install the system-board shield. 4. Install the stand. 5. Install the bottom cover. 6. Install the back cover. 7. Follow the procedure in After working inside your computer. Camera Removing the camera Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the back cover. 3. Remove the bottom cover. 4. Remove the stand. 5. Remove the system-board shield. 42 Removing and installing components