Dell Inspiron 5400 AIO Inspiron 24-5400 Service Manual - Page 51
Base panel, Removing the base panel
View all Dell Inspiron 5400 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
5. Install the system-board shield. 6. Install the stand. 7. Install the bottom cover. 8. Install the back cover. 9. Follow the procedure in After working inside your computer. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. Base panel Removing the base panel Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the back cover. 3. Remove the bottom cover. 4. Remove the stand. 5. Remove the hard drive. 6. Remove the system-board shield. 7. Remove the memory modules. 8. Remove the fan. 9. Remove the heat sink. 10. Remove the antennas. 11. Remove the wireless card. 12. Remove the speakers. 13. Remove the solid-state drive. 14. Remove the power-button board. 15. Remove the camera. 16. Remove the microphones. 17. Remove the system board. 18. Remove the display panel. About this task The following image indicates the location of the base panel and provides a visual representation of the removal procedure. Removing and installing components 51