Dell Latitude E5500 Service Manual - Page 2
Bottom of the Base Assembly - manual
View all Dell Latitude E5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Back to Contents Page Bottom of the Base Assembly Dell™ Latitude™ E5400 and E5500 Service Manual Removing the E5400 Bottom of the Base Assembly Replacing the E5400 Bottom of the Base Assembly Removing the E5500 Bottom of the Base Assembly Replacing the E5500 Bottom of the Base Assembly Removing the E5400 Bottom of the Base Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Follow the procedures in Before Working on Your Computer. 2. Close the display and turn the computer upside down. 3. Loosen the five captive screws securing the bottom of the base assembly. 4. Pry up on the recess near the slender edge where indicated and slide the bottom of the base assembly toward the left side of the computer, and lift it up. 1 E5400 bottom of the base assembly 2 captive screws (5) Replacing the E5400 Bottom of the Base Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. NOTE: This procedure assumes that you have completed the removal procedure first.