Dell Latitude LM Reference and Troubleshooting Guide - Page 76
Subtests, SCSI Devices Test Group, Network Interface Test Group, Audio Test Group
View all Dell Latitude LM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Subtests The four subtests in the Parallel Ports Test Group confirm the following port functions: • Parallel Internal Test Checks several internal functions of the parallel port • Parallel External Loopback Test Tests the functionality of the control lines through an external loopback connector, if an external loopback connector is available • Parallel External Interrupt Test Tests the parallel port's ability to generate interrupts from all possible sources, if an external loopback connector is available • Parallel Printer Pattern Test Tests whether the port(s) can retain data, print text on a printer, and generate interrupts SCSI Devices Test Group The subtests in the SCSI Devices Test Group check the functionality of the small computer system interface (SCSI) controller in the Dell Latitude Advanced Port Replicator and the SCSI devices attached to it. NOTE: The SCSI Devices Test Group does not apply to the Dell Latitude LM. Network Interface Test Group The subtests in the Network Interface Test Group verify the basic operation of the network interface controller in the Dell Latitude Advanced Port Replicator. They test the controller's internal functions, including read and write access to its registers and internal transmit and receive (loopback) capability. NOTE: The Network Interface Test Group does not apply to the Dell Latitude LM. Audio Test Group The subtests in the Audio Test Group check the functions of the audio controller and the computer's recording and playback features. Why Run an Audio Test? If you do not hear sounds from your built-in speakers when you expect to, it is possible that your operating system or sound application uses resource settings different than those of the audio controller in the computer. In the absence of an expected sound, first check the documentation that accompanied your operating system or sound application to see if the sound features are correctly configured to work with the computer. The default resource settings for the audio controller are: • DMA channel: 1 • IRQ line: 5 • Port address: 220h If necessary, change the resource settings in your operating system or sound application to match these default settings. If you still do not hear sound when you expect to, run the Audio Test Group. NOTE: Before running the Audio Test Group, make sure to enable the built-in speaker(s), and make sure that the speaker volume has not been muted. Subtests The 11 subtests in the Audio Test Group confirm the following functions: • Software Reset Test Checks for the presence of an active audio controller in your system • Compatibility ID Test Determines if the correct sound controller is installed for your system • Interrupt Test Checks to see if the audio controller is generating an interrupt on the IRQ line configured for that controller 4-20 Dell Latitude LM Reference and Troubleshooting Guide