Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 169

Example OS10(conf-range-eth1/1/7-1/1/8)# dot1x re-authentication Supported Releases 10.2.0E or later dot1x timeout quiet-period Sets the number of seconds that the device remains in quiet state following a failed authentication exchange with a supplicant. Syntax dot1x timeout quiet-period seconds Parameters quiet period seconds - Enter the number of seconds for the 802.1X quiet period timeout (1 to 65535). Default 60 seconds Command Mode INTERFACE Usage Information The no version of this command resets the value to the default. Example OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout quiet-period 120 Supported Releases 10.2.0E or later dot1x timeout re-authperiod Sets the number of seconds between re-authentication attempts. Syntax dot1x timeout re-authperiod seconds Parameters re-authperiod seconds - Enter the number of seconds for the 802.1X re-authentication timeout (1 to 65535). Default 3600 seconds Command Mode INTERFACE Usage Information The no version of this command resets the value to the default. Example OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout re-authperiod 7200 Supported Releases 10.2.0E or later dot1x timeout server-timeout Sets the number of seconds that the device waits before retransmitting a packet to the authentication server. Syntax Parameters Default Command Mode Usage Information Example dot1x timeout server-timeout seconds server-timeout seconds - Enter the number of seconds for the 802.1X server timeout (1 to 65535). 30 seconds INTERFACE The no version of this command resets the value to the default. OS10(conf-range-eth1/1/7-1/1/8)# dot1x server-timeout 60 Supported Releases 10.2.0E or later Layer 2 169