Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 463

NTP commands ntp authenticate Enables authentication of NTP traffic between the device and the NTP time serving hosts. Syntax Parameters Default Command Mode Usage Information Example ntp authenticate None Not configured CONFIGURATION You must also configure an authentication key for NTP traffic using the ntp authentication-key command. The no version of this command disables NTP authentication. OS10(config)# ntp authenticate Supported Releases 10.2.0E or later ntp authenticate-key Configures the authentication key for trusted time sources. Syntax ntp authenticate-key number md5 [0 | 7] key Parameters • number - Enter the authentication key number (1 to 4294967295). • md5 - Set to MD5 encryption. • 0 - Set to unencrypted format (default). • 7 - Set to hidden encryption. • key - Enter the authentication key. Default Command Mode Usage Information Example 0 CONFIGURATION The authentication number must be the same as the number parameter configured in the ntp trusted-key command. Use the ntp authenticate command to enable NTP authentication. OS10(config)# ntp authentication-key 1200 md5 0 dell Supported Releases 10.2.0E or later ntp broadcast client Configures the interface to receive NTP broadcasts from an NTP server. Syntax Parameters ntp broadcast client None System management 463