Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 621

OS10(config-qos-map)# queue 3 qos-group 7 OS10(config-qos-map)# Supported Releases 10.3.0E or later trust-map Applies a dot1p or dscp traffic class to a queue trust map. Syntax trust {dot1p | dscp} trust-map-name Parameters • dot1p- Applies a dot1p trust map. • dscp-Applies a dscp trust map. Default Command Mode Disabled SYSTEM-QOS INTERFACE Usage Information Example Use the show qos maps type [tc-queue | trust-map-dot1p | trust-map-dscp] [string] command to view the current trust mapping. You should change the trust map only during no traffic flow, and verify the correct policy maps are applied. The no version of this command returns the value to the default. OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# trust-map dscp dscp-trustmap1 Supported Releases 10.3.0E or later wred Configures a weighted random early detection (WRED) profile. Syntax wred wred-profile-name Parameters wred-profile-name - Enter a name for the WRED profile. Default Not configured Command Mode CONFIGURATION Usage Information The no version of this command removes the WRED profile. Example OS10(config)# wred test_wred OS10(config-wred)# Supported Releases 10.4.0E(R1) or later Quality of service 621