Dell MX5108n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 412
show ipv6 ospf statistics, timers spf OSPFv3, Displays OSPFv3
View all Dell MX5108n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
show ipv6 ospf statistics Displays OSPFv3 traffic statistics. Syntax show ipv6 ospf [instance-number] statistics [interface interface] Parameters • instance-number - (Optional) Enter an OSPFv3 instance number (1 to 65535). • interface interface - (Optional) Enter the interface information: - ethernet node/slot/port[:subport] - Enter an Ethernet port interface. - port-channel number - Enter the port-channel interface number (1 to 128). - vlan vlan-id - Enter the VLAN ID number (1 to 4094). Default Command Mode Usage Information Example Not configured EXEC This command displays OSPFv3 traffic statistics for a specified instance or interface, or for all OSPFv3 instances and interfaces. OS10# show ipv6 ospf interface ethernet 1/1/1 Interface ethernet1/1/1 Receive Statistics rx-invalid 0 rx-invalid-bytes 0 rx-hello 0 rx-hello-bytes 0 rx-db-des 0 rx-db-des-bytes 0 rx-ls-req 0 rx-ls-req-bytes 0 rx-ls-upd 0 rx-ls-upd-bytes 0 rx-ls-ack 0 rx-ls-ack-bytes 0 Transmit Statistics tx-hello 1054 tx-hello-bytes 37944 tx-db-des 0 tx-db-des-bytes 0 tx-ls-req 0 tx-ls-req-bytes 0 tx-ls-upd 0 tx-ls-upd-bytes 0 tx-ls-ack 0 tx-ls-ack-bytes 0 Error packets (Receive statistics) bad-src 0 dupe-id 0 hello-err 0 mtu-mismatch 0 nbr-ignored 0 resource-err 0 bad-lsa-len 0 lsa-bad-type 0 lsa-bad-len 0 lsa-bad-cksum 0 hello-tmr-mismatch 0 dead-ivl-mismatch 0 options-mismatch 0 nbr-admin-down 0 own-hello-drop 0 self-orig 0 wrong-length 0 version-mismatch 0 area-mismatch 0 Supported Releases 10.4.0E(R1) or later timers spf (OSPFv3) Enables shortest path first (SPF) throttling to delay an SPF calculation when a topology change occurs. Syntax timers spf [start-time [hold-time [max-wait]]] Parameters • start-time - Sets the initial SPF delay in milliseconds (1 to 600000; default 1000). • hold-time - Sets the additional hold time between two SPF calculations in milliseconds (1 to 600000; default 10000). • max-wait - Sets the maximum wait time between two SPF calculations in milliseconds (1 to 600000; default 10000). 412 Layer 3