Dell OptiPlex 7010 Owner's Manual (Small Form Factor) - Page 19
Installing the System Fan, Removing the Speaker
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the System Fan 1. Place the system fan in the chassis. 2. Pass the grommets through the chassis and slide outward along the grooves to secure them in place. 3. Thread the fan cable through the restraint and connect it to the system board. 4. Install the: a) drive cage b) front bezel c) cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Speaker 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) front bezel c) drive cage 3. Disconnect the speaker cable from the system board. 4. Press the speaker-securing tab, and slide the speaker towards the right of the computer to release it. 19
Installing the System Fan
1.
Place the system fan in the chassis.
2.
Pass the grommets through the chassis and slide outward along the grooves to secure them in place.
3.
Thread the fan cable through the restraint and connect it to the system board.
4.
Install the:
a)
drive cage
b)
front bezel
c)
cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
cover
b)
front bezel
c)
drive cage
3.
Disconnect the speaker cable from the system board.
4.
Press the speaker-securing tab, and slide the speaker towards the right of the computer to release it.
19