Dell OptiPlex 7010 Owner's Manual (Small Form Factor) - Page 20
Installing the Speaker, Removing the Power-Switch Cable, After Working Inside Your Computer
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing the Speaker 1. Place the speaker at the appropriate location on the chassis rear. 2. Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it. 3. Connect the speaker cable to the system board. 4. Install the: a) drive cage b) front bezel c) cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Power-Switch Cable 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) front bezel c) drive cage 3. Disconnect the power-switch cable from the system board. 20
Installing the Speaker
1.
Place the speaker at the appropriate location on the chassis rear.
2.
Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it.
3.
Connect the speaker cable to the system board.
4.
Install the:
a)
drive cage
b)
front bezel
c)
cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Switch Cable
1.
Follow the procedures in
Before Working Inside Your Computer.
2.
Remove the:
a)
cover
b)
front bezel
c)
drive cage
3.
Disconnect the power-switch cable from the system board.
20