Dell OptiPlex 7010 Owner's Manual (Small Form Factor) - Page 26
Removing the Heat Sink
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) front bezel c) drive cage 3. Press the clip to release and disconnect the heat-sink assembly cable from the system board. 4. Release the I/O Board/FlyWire cable from the routing channel on the heat sink. 26
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
cover
b)
front bezel
c)
drive cage
3.
Press the clip to release and disconnect the heat-sink assembly cable from the system board.
4.
Release the I/O Board/FlyWire cable from the routing channel on the heat sink.
26