Dell OptiPlex 7010 Owner's Manual (Small Form Factor) - Page 28
Installing the Heat Sink, Removing the Processor
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the Heat Sink 1. Place the heat sink assembly into the chassis. 2. Tighten the captive screws to secure the heat-sink assembly to the system board. 3. Connect and thread the I/O Board/FlyWire cable to the routing channel on the heat sink. 4. Connect the fan cable to the system board. 5. Connect the heat sink assembly cable to the system board. 6. Install the: a) drive cage b) front bezel c) cover 7. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage d) heat sink 3. Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the processor cover and remove the processor from its socket. 28