Dell OptiPlex 7071 Tower Tower Service Manual - Page 12

Disassembly and reassembly, Recommended tools, Screw list

Page 12 highlights

3 Disassembly and reassembly Recommended tools The procedures in this document require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Philips #2 screwdriver • Plastic scribe • Hex screwdriver Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Wireless card Secured to System board Screw type M2x3 Quantity 1 Screw image Solid-state drive System board M2x4 1 Intel Optane memory module Power-supply unit System board Chassis M2x4 1 #6-32 3 Ports bezel Chassis #6-32 1 System board Chassis #6-32 8 Processor fan and heatsink assembly VR heat sink System board System board Captive screw 4 Captive screw 2 12 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
Phillips #0 screwdriver
Phillips #1 screwdriver
Philips #2 screwdriver
Plastic scribe
Hex screwdriver
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Screw type
Quantity
Screw image
Wireless card
System board
M2x3
1
Solid-state drive
System board
M2x4
1
Intel Optane memory
module
System board
M2x4
1
Power-supply unit
Chassis
#6-32
3
Ports bezel
Chassis
#6-32
1
System board
Chassis
#6-32
8
Processor fan and heat-
sink assembly
System board
Captive screw
4
VR heat sink
System board
Captive screw
2
3
12
Disassembly and reassembly