Dell OptiPlex 7071 Tower Tower Service Manual - Page 21
-inch hard drive, Removing the 3.5-inch hard drive
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Steps 1. Place the hard drive into the hard-drive bracket and align the tabs on the bracket with the slots on the hard drive. 2. Snap the hard drive into the hard-drive bracket. Next steps 1. Install the 2.5-inch hard drive assembly. 2. Install the left-side cover. 3. Follow the procedure in After working inside your computer. 3.5-inch hard drive Removing the 3.5-inch hard drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. About this task The following images indicate the location of the 3.5-inch hard drive assembly and provides a visual representation of the removal procedure. Disassembly and reassembly 21
Steps
1.
Place the hard drive into the hard-drive bracket and align the tabs on the bracket with the slots on the hard drive.
2.
Snap the hard drive into the hard-drive bracket.
Next steps
1.
Install the
2.5-inch hard drive assembly
.
2.
Install the
left-side cover
.
3.
Follow the procedure in
After working inside your computer
.
3.5-inch hard drive
Removing the 3.5-inch hard drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
left-side cover
.
About this task
The following images indicate the location of the 3.5-inch hard drive assembly and provides a visual representation of the removal
procedure.
Disassembly and reassembly
21