Dell OptiPlex 7071 Tower Tower Service Manual - Page 19
-inch hard drive bracket, Removing the 2.5-inch hard drive bracket
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Steps 1. NOTE: Note the orientation or the SATA connector marking on the hard drive so that you can replace it correctly. Slide the hard-drive assembly into the hard-drive cage until it snaps into place. 2. Connect the data cable and power cable to the hard drive. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. 2.5-inch hard drive bracket Removing the 2.5-inch hard drive bracket Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. Disassembly and reassembly 19
Steps
1.
NOTE:
Note the orientation or the SATA connector marking on the hard drive so that you can replace it correctly.
Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
2.
Connect the data cable and power cable to the hard drive.
Next steps
1.
Install the
left-side cover
.
2.
Follow the procedure in
After working inside your computer
.
2.5-inch hard drive bracket
Removing the 2.5-inch hard drive bracket
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
left-side cover
.
Disassembly and reassembly
19