Dell OptiPlex 7071 Tower Tower Service Manual - Page 37
Removing the 2280 solid-state drive/Intel Optane memory module, Installing the 2280 solid-state
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Removing the 2280 solid-state drive/Intel Optane memory module Prerequisites NOTE: You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information about disabling the Intel Optane memory, see Disabling Intel Optane memory. 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. About this task The following images indicate the location of the 2280 solid-state drive/Intel Optane memory module and provide a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board. 2. Slide and lift the solid-state drive/Intel Optane memory from the M.2 card slot on the system board. Installing the 2280 solid-state drive/Intel Optane memory module Prerequisites CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the 2280 solid-state drive/Intel Optane memory module and provides a visual representation of the installation procedure. Disassembly and reassembly 37