Dell OptiPlex 7071 Tower Tower Service Manual - Page 32
Installing the memory modules
![]() |
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module. Installing the memory modules Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the memory modules and provides a visual representation of the installation procedure. Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place. NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it. NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the slot. NOTE: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. 32 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7071-tower-service-manual-758e417/32.png)