Dell OptiPlex 7071 Tower Tower Service Manual - Page 31
Memory modules, Removing the memory modules
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. Memory modules Removing the memory modules Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. About this task The following images indicate the location of the memory modules and provides a visual representation of the removal procedure. Steps 1. Lay the chassis on the right side. 2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot. 3. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot. NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer. NOTE: Note the slot and the orientation of the memory module in order to replace it in the correct slot. NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the slot. Disassembly and reassembly 31