Dell OptiPlex 7071 Tower Tower Service Manual - Page 36
Installing the 2230 solid-state drive/Intel Optane memory module
![]() |
View all Dell OptiPlex 7071 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the 2230 solid-state drive/Intel Optane memory module Prerequisites CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the solid-state drive/Intel Optane memory and provides a visual representation of the installation procedure. Steps 1. Locate the notch on the 2230 solid-state drive/Intel Optane memory. 2. Align the notch on the 2230 solid-state drive/Intel Optane memory with the tab on the M.2 card slot. 3. Slide the 2230 solid-state drive/Intel Optane memory into the M.2 card slot on the system board. 4. Replace the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. NOTE: Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane memory, see Enabling Intel Optane memory. 36 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7071-tower-service-manual-758e417/36.png)