Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 17
Rubber feet, Removing the rubber feet
View all Dell OptiPlex 7770 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
22. eDP cable connector 23. Touch cable connector Rubber feet Removing the rubber feet 1. Follow the procedure in Before working inside your computer. 2. Remove the Stand. 3. Pry the rubber feet at the bottom edge from the display assembly base and pull it out. Installing the rubber feet 1. Align the rubber feet with the slots on the display assembly base and push it firmly in place. Removing and Installing components 17
22.
eDP cable connector
23.
Touch cable connector
Rubber feet
Removing the rubber feet
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
Stand
.
3.
Pry the rubber feet at the bottom edge from the display assembly base and pull it out.
Installing the rubber feet
1.
Align the rubber feet with the slots on the display assembly base and push it firmly in place.
Removing and Installing components
17