Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 62
Installing the Input and Output bracket
View all Dell OptiPlex 7770 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Installing the Input and Output bracket 1. To install the Input and Output bracket (I/O) bracket: a) Align the slots on the Input and Output bracket (I/O) bracket with the ports on the system board [1]. b) Replace the three screws (M3x5) that secure the I/O bracket to the display assembly base [2]. 2. To install the PSU cable: a) Route back the power supply cables through the retention clips in the chassis [1]. b) Slide and replace the power supply socket on the chassis [2]. c) Replace the single (M3x5) screw securing the power supply socket to the I/O bracket [3]. 62 Removing and Installing components
Installing the Input and Output bracket
1.
To install the Input and Output bracket (I/O) bracket:
a)
Align the slots on the Input and Output bracket (I/O) bracket with the ports on the system board [1].
b)
Replace the three screws (M3x5) that secure the I/O bracket to the display assembly base [2].
2.
To install the PSU cable:
a)
Route back the power supply cables through the retention clips in the chassis [1].
b)
Slide and replace the power supply socket on the chassis [2].
c)
Replace the single (M3x5) screw securing the power supply socket to the I/O bracket [3].
62
Removing and Installing components