Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 50
Processor, Removing the processor
View all Dell OptiPlex 7770 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Install the following components: a) System board shield b) Back cover c) Stand 4. Follow the procedure in After working inside your computer. Processor Removing the processor 1. Follow the procedure in Before working inside your computer. 2. Remove the following components: a) Stand b) Back cover c) System board shield d) Heat sink 3. To remove the processor: a) Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1]. b) Lift the lever upward, and lift the processor shield [2]. CAUTION: The processor socket pins are fragile and can be permanently damaged. Be careful not to bend the pins in the processor socket when removing the processor out of the socket. c) Lift the processor and remove it from the processor socket [3]. NOTE: After removing the processor, place it in an antistatic container for reuse, return, or temporary storage. Do not touch the bottom of the processor to avoid damage to the processor contacts. Touch only the side edges of the processor. 50 Removing and Installing components