Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 45
Pop-Up Camera, Removing the pop-up camera
View all Dell OptiPlex 7770 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Install the following components: a) System board shield b) Back cover c) Stand 4. Follow the procedure in After working inside your computer. Pop-Up Camera Removing the pop-up camera 1. Follow the procedure in Before working inside your computer. 2. Remove the following components: a) Stand b) Back cover c) System board shield 3. To remove the camera assembly: a) Remove the two screws (M3x5) that secure the camera assembly cover to the middle frame [1]. b) Lift the camera assembly cover away from the middle frame [2]. c) Disconnect the camera cable from the system board and unroute the camera cable from the routing channel [3]. d) Remove the two screws (M3x5) that secure the pop-up camera assembly to the middle frame [4]. e) Slide and lift the pop-up camera assembly off the middle frame [5]. 4. To remove the camera bezel: a) Press the top of the pop-up camera assembly to extend the pop-up camera [1]. b) Remove the three screws (M3x5) that secure the bezel to the pop-up camera assembly [2]. Removing and Installing components 45