Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 41

Heat sink, Removing the heat sink - dGPU

Page 41 highlights

4. Install the following components: a) System board shield b) Back cover c) Stand 5. Follow the procedure in After working inside your computer. Heat sink The following topics lists heat sink removing and installing steps for unified memory architecture (UMA) and discrete graphics processing unit (dGPU). Removing the heat sink - dGPU 1. Follow the procedure in Before working inside your computer. 2. Remove the following components: a) Stand b) Back cover c) System board shield 3. In the reverse order (as indicated on the heat sink), loosen the nine captive screws that secure the heat sink to the system board and display assembly base [1]. 4. Lift the heat sink off the system board and display assembly base [2]. Removing and Installing components 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

4.
Install the following components:
a)
System board shield
b)
Back cover
c)
Stand
5.
Follow the procedure in
After working inside your computer
.
Heat sink
The following topics lists heat sink removing and installing steps for unified memory architecture (UMA) and discrete graphics processing
unit (dGPU).
Removing the heat sink - dGPU
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the following components:
a)
Stand
b)
Back cover
c)
System board shield
3.
In the reverse order (as indicated on the heat sink), loosen the nine captive screws that secure the heat sink to the system board and
display assembly base [1].
4.
Lift the heat sink off the system board and display assembly base [2].
Removing and Installing components
41