Dell OptiPlex 7770 All In One OptiPlex 7770 All-in-One Service Manual - Page 76
Lift the I/O board with its cables from the display assembly base [3].
View all Dell OptiPlex 7770 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
c) Remove the two screws (M3x5) securing the I/O board shield to the display assembly base [3]. d) Lift the I/O board shield from the display assembly base [4]. 4. To remove the I/O board: a) Remove the headset port cable from the routing guide on the I/O board [1]. b) Remove the two screws (M3x5) that secure the I/O board to the display assembly base [2]. c) Lift the I/O board with its cables from the display assembly base [3]. 76 Removing and Installing components
c)
Remove the two screws (M3x5) securing the I/O board shield to the display assembly base [3].
d)
Lift the I/O board shield from the display assembly base [4].
4.
To remove the I/O board:
a)
Remove the headset port cable from the routing guide on the I/O board [1].
b)
Remove the two screws (M3x5) that secure the I/O board to the display assembly base [2].
c)
Lift the I/O board with its cables from the display assembly base [3].
76
Removing and Installing components