Dell OptiPlex 9020 All In One Dell OptiPlex 9020 AIO Owners Manual - Page 12
Installing the Back Cover, Removing the Memory - stand
View all Dell OptiPlex 9020 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4. Lift the cover and remove it from the computer using the notches near the input/output (I/O) panel. Installing the Back Cover 1. Align the back cover to its original position on the computer and press until it clicks in place. 2. Tighten the screws to secure the back cover to the computer. 3. Install the VESA stand. 4. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover 12
4.
Lift the cover and remove it from the computer using the notches near the input/output (I/O) panel.
Installing the Back Cover
1.
Align the back cover to its original position on the computer and press until it clicks in place.
2.
Tighten the screws to secure the back cover to the computer.
3.
Install the VESA stand.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
12