Dell OptiPlex 9020 All In One Dell OptiPlex 9020 AIO Owners Manual - Page 39
Installing the Display Panel, processor fan
View all Dell OptiPlex 9020 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
6. Remove the screws that secure the display bracket to the display panel. Remove the display bracket from the display panel. Installing the Display Panel 1. Tighten the screws to secure the display bracket to the display panel. 2. Place the display panel on the chassis. 3. Place the base panel on the chassis. 4. Tighten the screws to secure the base panel to the chassis. 5. Connect the LVDS cable to the display panel. 6. Install: a) system board b) antenna module c) speakers d) processor fan e) heat-sink assembly 39
6.
Remove the screws that secure the display bracket to the display panel. Remove the display bracket from the
display panel.
Installing the Display Panel
1.
Tighten the screws to secure the display bracket to the display panel.
2.
Place the display panel on the chassis.
3.
Place the base panel on the chassis.
4.
Tighten the screws to secure the base panel to the chassis.
5.
Connect the LVDS cable to the display panel.
6.
Install:
a)
system board
b)
antenna module
c)
speakers
d)
processor fan
e)
heat-sink assembly
39