Dell OptiPlex 9020 All In One Dell OptiPlex 9020 AIO Owners Manual - Page 49
Rapid Start Technology, Delete All Key - drivers
View all Dell OptiPlex 9020 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Option Table 6. Performance Option Multi Core Support Intel SpeedStep C States Control Limited CPUID Value Intel TurboBoost Hyper-Thread Control Rapid Start Technology Table 7. Power Management Option AC Recovery Description • Append from File- Adds a key to the current database from a user-selected file • Delete- Deletes the selected key • Reset All Keys- Resets to default setting • Delete All Keys- Deletes all the keys NOTE: If you disable the Custom Mode, all the changes made will be erased and the keys will restore to default settings. Description Specifies whether the process will have one or all cores enabled. The performance of some applications will improve with the additional cores. • All - Enabled by default •1 •2 Allows you to enable or disable the Intel SpeedStep mode of the processor. This option is enabled by default. Allows you to enable or disable the additional processor sleep states. This option is enabled by default. Allows you to limit the maximum value of the Standard CPUID Fuction support. Some operation systems will not complete installation when maximum CPUID Function supported is greater than 3. • Enable CPUID Limit - This option is disabled by default Allows you to enable or disable Intel TurboBoost mode of the processor. This option is enabled by default. • Disabled - Does not allow the TurboBoost driver to increase the performance state of the processor above the standard performance. • Enabled - Allows the Intel TurboBoost driver to increase the performance of the CPU or graphics processor. Allows you to enable or disable the Hyper-Threading technology. This option is enabled by default. Improves the battery life automatically by putting system into a low power state during Sleep, after a user-specified amount of time. Some increase in resume time from Sleep state may be experience, but the average resume times should be faster than the resume from Hibernate. The timer can be set starting from the value "0". By default, this option is disabled. Description Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC Recovery to: • Power Off (default) 49