Dell OptiPlex 9020 All In One Dell OptiPlex 9020 AIO Owners Manual - Page 15
Installing the Power and OSD Buttons Board, Removing the System-Board Shield
View all Dell OptiPlex 9020 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Power and OSD Buttons Board 1. Align and place the power and OSD buttons board on the computer. 2. Connect the cable to the power and OSD buttons board. 3. Install: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket 3. Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from the computer. 15
Installing the Power and OSD Buttons Board
1.
Align and place the power and OSD buttons board on the computer.
2.
Connect the cable to the power and OSD buttons board.
3.
Install:
a)
back cover
b)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
3.
Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from
the computer.
15