Dell OptiPlex 9020 All In One Dell OptiPlex 9020 AIO Owners Manual - Page 26
Removing the I/O Board Shield
View all Dell OptiPlex 9020 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the I/O Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) power supply fan e) system-board shield 3. Lift the I/O panel away from the computer. 4. Remove the screws that secure the power connector to the I/O board shield. 5. Remove the screws that secure the I/O board shield to the chassis. Loosen the power connector and press it down the socket. 26
Removing the I/O Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
d)
power supply fan
e)
system-board shield
3.
Lift the I/O panel away from the computer.
4.
Remove the screws that secure the power connector to the I/O board shield.
5.
Remove the screws that secure the I/O board shield to the chassis. Loosen the power connector and press it down
the socket.
26