Dell OptiPlex GXa Service Manual - Page 170
Enables On or disables Off the NIC., default option, Hard Disk Only, CD-ROM
View all Dell OptiPlex GXa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Table A-1. System Setup Categories (continued) Category Function Keyboard Errors Enables or disables reporting of keyboard errors during POST. System Password Displays current status of system's password security feature. Also used to assign and verify a new password. Password Status Provides an extra measure of system security by letting you set the system password to Locked or Unlocked. Boot Sequence Boot Sequence can be set to Diskette First (the default option), Hard Disk Only, CD-ROM First, or Device List. Setup Password Restricts access to System Setup program. Auto Power On Allows you to set the day and time you want the system to power on automatically. The time uses the 24-hour format. Power Management With the Power Management category enabled, DPMS monitors and most EIDE drives automatically switch into low-power mode during periods of system inactivity. CAUTION: Before enabling this feature, check the monitor documentation to make sure the system has a DPMS-compliant monitor. Otherwise, there is a risk of damaging the monitor. NOTE: Not all EIDE hard-disk drives support this feature. Enabling this feature for a drive that does not support it may cause the EIDE drive to become inoperable until the system is restarted and the Power Management category is disabled. Wakeup On LAN Wakeup On LAN determines whether the Wakeup On LAN feature is set to Off or On (Add-in NIC). You must reboot your system before a change takes effect. NOTE: An optional Wakeup On LAN-capable network card is required to use the Wakeup On LAN feature. Sound Enables (On) or disables (Off) the integrated sound controller. NIC Enables (On) or disables (Off) the NIC. A-4 Dell OptiPlex GXa and OptiPlex NX Systems Service Manual