Dell OptiPlex GXa Service Manual - Page 97
Removing and Replacing Parts on the Midsize Chassi..., Recommended Tools
View all Dell OptiPlex GXa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 5 Removing and Replacing Parts on the Midsize Chassis This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell OptiPlex GXa midsize computer. If you are servicing a low-profile, mini tower, or Net PC chassis, use Chapter 4, "Removing and Replacing Parts on the Low-Profile Chassis," Chapter 6, "Removing and Replacing Parts on the Mini Tower Chassis," or Chapter 7, "Removing and Replacing Parts on the Net PC Chassis," as appropriate. Unless otherwise noted, each procedure assumes the following: • You have performed the steps in "Precautionary Measures" found later in this chapter. • You have removed the computer cover. • You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Recommended Tools Most of the procedures in this chapter require the use of one or more of the following tools: • Small flat-blade screwdriver • Wide flat-blade screwdriver • #1 and #2 Phillips screwdrivers • 1/4-inch nutdriver • Tweezers or long-nose pliers Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts on the Midsize Chassis 5-1